APPLIATION:
PLUS ACRYLIC PRO-01 acrylic - latex dispersion paint is particularly recommended for painting by airless sprayer. Due to special formula and technology of production (multiple filtering, stabilization of working density etc.) this paint is easily applied by spraying technique, which significantly lowers the cost of application. This paint can be used with all mineral painting primers in all living and public spaces. It creates highly esthetic coat, covers surfaces perfectly and is resistant to wet scrubbing. PRO-01 ACRYLIC W PLUS paint represents a high quality ecological product manufactured using modern technologies, covering surfaces perfectly, giving them flat appearance. This paint is permeable to steams and gasses, which in turn enables correct ‘wall breathing’. PRO-01 AKRYL W PLUS creates unique, flat, decorative, perfectly white cover. This paint is highly recommended for all paint jobs where fresh, clean and quick results are desired.

PREPARING SURFACES:
PRO-01 ACRYLIC W PLUS requires surfaces that are dry, smooth, solid, free of old, loose paint and dust. In the event of problems with greasy stains or need to reinforce surfaces, which may reduce absorption, use of primer such as pro 04 or Reno Grunt is recommended. If surface is new and absorbs water easily, we recommend use of microparticle primer Aktiv Grunt. If the surface only minimally absorbs water, use ACRYLIC PRO-01 W PLUS thinned with water at a rate of 1:1. Surfaces that were previously painted with glue-based paints have to be cleaned to completely remove all paint. Surfaces previously painted with latex paints should be washed with soaped water.

Note!

• Mineral plaster and all other products that contain cement or lime, require carbonization period (28 days). Ignoring it may result in complete damage to the applied paint.
• Painting surfaces that are too weak may result in peeling of the paint or bubbles..
• Extremely absorptive surfaces severely lower coverage efficiency, which in turn increases cost.

PREPARATION OF PRODUCT:
Before applying, stir paint carefully by hand without using fast rotary stirrers. Usually 2 coats of paint are required to achieve desired esthetic results. To refresh surfaces previously painted white, only one coat of paint should be necessary. At standard conditions (20^oC and 60% humidity) it is recommended to wait 2-3 hours before re-applying the product.

APPLICATION:
PRO-01 ACRYLIC W PLUS is paint intended for use with paint sprayers, but if necessary can be applied with other painting tools (brushes, rollers). If painting with brush, thin paint with water (approx. 0,05 - 0,10 liter of water per 1 liter of paint), particularly on porous surfaces. Note: manufacturer guarantees quality of product, but does not take responsibility for its application. Presented here paining instructions in reference to application, are for informative purposes only and by no means replace professional knowledge and experience. If you have any questions in regard to unusual painting conditions (e.g. high temperature, high or low humidity, unusual surfaces), please contact Malfarb Customer Service.

TECHNICAL SPECIFICATIONS

Temperature	Minimum temperature of painted surface and air above + 8oC,
Storage	Store and transport in original, tightly closed container, in temperature range between +5oC and + 35oC (applies also to surface temperature), in clean and dry place. Protect from sun and freezing.
Efficiency	Up to 14 m2/l (one coat efficiency)
Application	Paint sprayer, brush, roller
Drying	2 hours
Re-application	After 2 hours
Number of coats	1 - 2
Best before	24 months from the date of production