|
APPLIATION:
INTERIOR EXTRA WHITE PRO 02 - acrylic paint is intended for painting interior walls and ceilings. Due to special formula and technology
of production (multiple filtering, stabilization of working density etc.) this paint is easily applied by hydrodynamic aggregate, which
significantly lowers the cost of application. Since this paint doesn`t include any chemical solvents, which can have negative effects on
environment, we can recommend our product with confidence to be used in wide range of applications. Surfaces painted with this paint are
characterized by flat and snow white color. Product is intended for painting of renovated interiors.
PREPARING SURFACES:
The surface must be dry, carrying and strong, free from substances that reduce friction (free form dust and greasy stains).
If surface absorbs water easily, we recommend use of a primer such as PRO 04 or Reno Grunt. If the surface is new and absorbs water to
the great extend, use of microparticle primer Aktiv Grunt is recommended. Surfaces that were previously painted with glue-based paints
have to be cleaned to completely remove all paint. Surfaces previously painted with latex paints should be washed with soaped water.
Note!
- Mineral plaster and all other products that contain cement or lime or potassium glass water, require carbonization period
(28 days). Ignoring it may result in complete damage to the applied paint.
- Painting surfaces that are too weak may result in peeling of the paint or bubbles.
- Extremely absorptive surfaces severely lower coverage efficiency, which in turn increases cost.
PREPARATION OF PRODUCT:
Before applying, stir paint carefully by hand without using fast rotary stirrers. At standard conditions (20oC and 60% humidity) it is
recommended to wait around 2 hour before re-applying the product. Usually 2 coats of paint are required to achieve desired esthetic
results.
APPLICATION:
INTERIOR EXTRA WHITE - ACRYLIC PRO 02 paint is intended for use with paint sprayers, but if necessary can be applied with other painting
tools (brushes, rollers). If painting with brush, thin paint with water (approx. 0,05 – 0,10 liter of water per 1 liter of paint),
particularly on porous surfaces. Surfaces that are not designated for painting should be covered.
TECHNICAL SPECIFICATIONS
| Temperature |
Minimum temperature of painted surface and air min + 8oC,
|
| Storage |
Store and transport in original, tightly closed container, in temperature range between +5oC and + 35oC (applies also to surface temperature), in clean and dry place. Protect from sun and freezing.
|
| Efficiency |
Up to 10 m2/l (one coat efficiency)
|
| Application |
Paint sprayer, brush, roller
|
| Drying |
2 hours
|
| Re-application |
After 2 hours
|
| Number of coats |
2 - 3
|
| Best before |
24 months from the date of production
|
|
