FILLERS RENO PUTZ Professional Filler APPLICATION: The primary use of the filler is applying thin coats on plaster, chipboard etc, on interior walls and ceilings to gain an even smooth surface. It can also be used for joining plasterboards and makes an ideal base for painting with other emulsions. RENO PUTZ is a high quality product with good adherence. Unlike gypsum, it can be used immediately, easy to apply and easy to shape. The final result is a snow-white, smooth surface ideal for wallpaper or painting with white paints produced by Malfarb. PREPARING SURFACES: Surfaces should be dry, free of dust dirt and grease. In case of problems with grease spots and/or there is a need to strengthen or reduce the absorption of the surfaces, a light coating of a deep penetrating primer such as Aktiv grunt (Active Primer) is recommended. USAGE: RENO PUTZ should be applied evenly with a metal trowel, pressing the filler firmly to the surface. In the case of imperfections, fill and sand down after drying. It is important that the surface temperature and drying temperature do not exceed +30°C. Keep out of direct sunlight! Setting time: approx 60 min. Maximum thickness for a single layer: 2 mm Maximum total thickness: 10 mm STORAGE, USE AND TRANSPORT: RENO PUTZ should be stored, used and transported in its originally closed packaging at a temperature of +5° - +35°C (also includes surface temperature) and in clean dry conditions. Protect from frost. SAFETY: S2 Keep away from children S26 In the event of eye contact wash with large quantities of water and consult your doctor. Polish Atest PZH B-204/97 Polish Norma: TWT/ 7/ 95/ AKW