APPLICATION:
AKRYL W PLUS – acrylic/latex-based emulsion paint – combines high coverage rate with enhanced resistance to scrubbing, it is designed for decorative coating of walls and ceilings in residential and public buildings. It can be applied to such substrates as: cement and cement/lime plaster, wallpapers. AKRYL W PLUS is a high-quality environmental friendly product manufactured with state-of-the-art technology, perfectly covering and providing mat appearance to coated substrate, at the same time allowing walls to freely “breathe”

PREPARING SURFACES:
ACRYL W PLUS requires a dry set surface, cleaned of grease, dust and pealing existing coatings, smooth and crack free. In case of grease spots, apply Aktiv grunt (Active Primer). Surfaces painted previously with glue paints should be thoroughly cleaned to the original surface. Surfaces painted previously with emulsion paints should be washed with water containing a detergent. Absorbent surfaces should be primed with a light coating of Aktiv grunt (Active Primer) or with Reno grunt (Reno Primer).
With highly absorptive surfaces, ACRYL W PLUS can be diluted with drinking water
in a ratio 1:1.
Note:
Plasters and various surfaces containing cement & lime require a 28-day carbonisation period. Skipping this might totally destroy the finish of the fresh paint coating.
Painting a surface that is too absorbent can drastically lower efficiency, which increases the cost.

USAGE:
The paint should be thoroughly mixed before use (do not use high speed mixers).ACRYL W PLUS can be applied with various tools (brush, roller or spray), but for painting with brush you should thin the paint with drinking water (approx 0.05 - 0.1 litre of water to 1 litre of paint) especially on surfaces with high porosity. For decorative effect 2 coats of paint are normally required. For refreshing a previous white coating, a single fresh coat is normally sufficient (a single even layer with a roller).
A subsequent layer can be applied normally after 2 - 3 hrs under standard room conditions (20°C and 60% humidity).
Note: Recommended types of roller: flock, velour and wool

EFFICIENCY:
Average usage for a single coating approx. 0.14 l/m2, although smooth and low absorptive surfaces (e.g.: plasterboard sheets) 0.1- 0.12 l/m2 is possible. However highly porous surfaces the usage can rise to as much as 0,17 l/m2.

STORAGE, USE AND TRANSPORT:
ACRYL W PLUS should be stored, used and transported in its originally closed packaging at a temperature of +5° - +35°C (also includes surface temperature) and in clean dry conditions. Protect from frost.

BEST BEFORE: 2 years from date of production

SAFETY:
S2 Keep away from children
S26 In the event of eye contact wash with large quantities of water and consult your doctor.

Polish Atest: 37/779/44/2007
Polish Norma: PN-C-81914:1998