APPLICATION:
VINYL E is recommended for decorative painting of elevations on various surfaces such as cement and lime cement plasters, cement sheets, concrete, aerated concrete, brick, stone, acrylic and mineral plaster, fillers and wood (impregnated). Can be used internally in dirty conditions.

PREPARING SURFACES:
Surfaces should be dry, free of dust dirt and grease. In case of problems with grease spots and/or there is a need to strengthen or reduce the absorption of the surfaces, a light coating of a deep penetrating primer such as Aktiv grunt (Active Primer) is recommended.
Note:
Painting a weak surface might cause bubbles and peeling in the spring the following year.
Painting a surface that is too absorbent can drastically lower efficiency, which increases the cost.
Plasters and various surfaces containing cement & lime require a 28-day carbonisation period. Skipping this might totally destroy the finish of the fresh paint coating.

USAGE:
The paint should be thoroughly mixed before use (do not use high speed mixers). V.E. can be applied with various tools (brush, roller or spray), but for painting with brush you should thin the paint with drinking water (approx 0.05 - 0.1 litre of water to 1 litre of paint) especially on surfaces with high porosity. For decorative effect 2 coats of paint are normally required. For refreshing a previous white coating, a single fresh coat is normally sufficient (a single even layer with a roller).
A subsequent layer can be applied normally after 3 - 4 hrs under standard room conditions (20°C and 60% humidity).
Note: Recommended types of roller: flock, velour and wool

EFFICIENCY:
Average usage for a single coating approx. 0.15 l/m2, although smooth and low absorptive surfaces this is typically 0.1 - 0.12 l/m2. However highly porous surfaces the usage can rise to as much as 0.2 l/m2.

STORAGE, USE AND TRANSPORT:
V.E. should be stored, used and transported in its originally closed packaging at a temperature of +5° - +35°C (also includes surface temperature) and in clean dry conditions. Protect from frost.

BEST BEFORE: 2 years from date of production.

SAFETY:
S2 Keep away from children
S26 In the event of eye contact wash with large quantities of water and consult your doctor.

Polish Atest PZH: HK/B/2038/02/99
Polish Norma: PN-C-81913:1998